STICKER CARE & APPLICATION
GET THE BEST FROM YOUR CROC CREW STICKER
Croc Crew stickers are printed on premium white vinyl, are waterproof and are designed for long-term indoor and outdoor use.
Like any quality adhesive sticker, how well it bonds and how long it looks its best depends on the surface, preparation and application. A few simple steps before you stick it down can make a big difference.
1. CHOOSE THE RIGHT SURFACE
For best results, apply your sticker to a clean, smooth, dry surface.
Good surfaces can include:
Cars • 4WDs • Caravans • Boats • Eskies • Toolboxes • Drink bottles • Windows and other smooth surfaces
Avoid applying stickers to:
- dirty, dusty or greasy surfaces
- loose or flaking paint
- heavily textured or porous surfaces
- silicone-treated surfaces
- freshly waxed or polished surfaces
- wet surfaces
Adhesion can vary depending on the material and condition of the surface.
2. CLEAN THE SURFACE PROPERLY
Before applying your sticker, remove dirt, grease, oil, wax and other residue from the area.
Wash the surface if necessary and allow it to dry completely.
For a final clean, a small amount of isopropyl alcohol on a clean lint-free cloth can help remove oils and residue from many suitable surfaces.
Allow the surface to dry completely before applying the sticker.
Do not apply the sticker over cleaning-product residue.
3. POSITION BEFORE YOU STICK
Before removing the backing paper, hold the sticker in position and make sure you are happy with its placement.
Take your time.
Once the adhesive makes firm contact with the surface, repositioning may reduce its ability to bond properly.
4. APPLY SLOWLY
Peel back a small section of the backing paper and begin applying the sticker from one side.
Slowly work across the design while pressing the sticker firmly onto the surface.
Use your fingers, a soft cloth or a suitable application squeegee to smooth the sticker down and push air toward the outside edges.
Avoid pulling or stretching the vinyl during installation.
5. PRESS DOWN THE EDGES
Once the sticker has been applied, firmly press across the entire design, paying particular attention to the outside edges and detailed die-cut areas.
Good edge adhesion helps reduce the chance of dirt or moisture getting underneath the sticker.
6. GIVE THE ADHESIVE TIME TO BOND
After application, give the adhesive time to establish a strong bond before subjecting the sticker to washing, heavy rain, high-pressure water or other demanding conditions.
Adhesive performance can vary according to the surface, temperature and environment.
7. CLEANING YOUR STICKER
Once properly applied, Croc Crew stickers are waterproof and suitable for outdoor use.
For routine cleaning, gently wash the sticker along with the surrounding surface.
Avoid deliberately directing high-pressure water at the edges of the sticker, as excessive pressure at close range may encourage edge lifting over time.
Avoid harsh solvents or abrasive cleaning products directly on the printed surface.
A LITTLE CARE GOES A LONG WAY
A properly prepared surface and careful application will give your Croc Crew sticker the best chance to stay firmly attached and looking great for the long haul.
Clean it. Dry it. Stick it. Press it. Then get back out there.
